Teresstic GTC 32
Premium Turbine Oil
Product Description
Teresstic GTC 32 is the brand name for a super-premium long-service-life turbine oil developed specifically to address the unique problems associated with turbines that operate in cyclic, or peak-load-leveling, service in high-temperature environments.
Certain turbines, both gas and steam, are in non-base-load service in which frequent stops and starts can create an unstable temperature environment that promotes the formation of oxidation by-products, which in turn can plug filters and cause erratic operation of close-tolerance servo valves. Teresstic GTC 32 has been formulated to reduce formation of oxidation by-products and to protect against those that do form.
Features and Benefits
- Provides clean, dependable lubrication for extended service periods
- Oxidation life significantly greater than that of conventional turbine oils
- Exceptional cleanliness per the ASTM D 4310 Sludging and Corrosion Control Test
- Fortified with oxidation, rust and foam inhibitors
- Incorporates technology that has been proven in millions of hours of excellent field service in the demanding high-temperature environments of GE Frame 7 and 9 turbines
Applications
Teresstic GTC 32 is the primary recommendation for applications that involve cyclic gas turbine operation. It is recommended by ExxonMobil for applications requiring General Electric's severe GEK-32568F standard, as well as DIN 51515 Parts 1and2, and DIN 51524 Part 1.
Typical Properties
| TERESSTIC GTC 32 |
|
| ISO Viscosity Grade |
32 |
| Color, ASTM D 1500 |
0.5 |
| Gravity, °API |
34.2 |
| Specific Gravity at 15.6°C (60°F) |
0.854 |
| Viscosity |
|
| cSt @ 40°C |
32.8 |
| cSt @ 100°C |
5.8 |
| Viscosity index |
100 |
| Flash Point, oC, ASTM D 92 |
215 |
| Pour Point, oC, ASTM D 97 |
-24 |
| Neutralization Number, ASTM D 974 mg KOH/g |
0.10 |
| Water Separability, ASTM D 1401, 54°C, 10 min, ml Oil/Water/Emulsion |
40/40/0 |
| Air Release, ASTM D 3427, min |
2.0 |
| Foaming Tendency/Stability, ASTM D 892, ml/ml |
|
| Sequence I |
0/0 |
| Sequence II |
10/0 |
| Sequence III |
0/0 |
| Rust Protection, ASTM D 665A, Distilled Water |
Pass |
| Rust Protection, ASTM D 665B, Synthetic Sea Water |
Pass |
| Copper Corrosion, ASTM D 130, 3 hrs @ 100°C |
1a |
| Oxidation Life, RPVOT, ASTM D 2272, minutes |
1000 |
| Oxidation Life, RPVOT, ASTM D 2272, modified, After Nitrogen blowing 3 liters/hr at 250 oF, minutes |
850 |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the applications referred to above and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than the applications referred to above. If disposing of used product, take care to protect the environment.
The Exxon (Esso) logotypes, the Running Tiger, and Teresstic are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
12-2010
Copyright ? 2001-2013 Exxon Mobil Corporation. All rights reserved.
