WYROL BG 460
| 美孚WYROL BG 460詳細說明 （瀏覽3次） |
WYROL BG
軸承和齒輪油
產品描述
WYROL BG系列高性能合成低著色軸承和齒輪油锉辫，設計用于軋機。由于其低的染色的傾向峭跺，它們是特別適合于使用在有色金屬的軋制機的應用。他們制定了與低染色合成成分锚躺，確保有足夠的潤滑提供重型軸承和齒輪單元的條件新罗。他們的低著色特性，確保質量不被削弱骄雇，通過金屬軋輥冷卻系統泄漏到训奢。這將確保一個最佳的生活質量得到從軋輥冷卻液惋肾，這降低了維護和總成本。WYROL BG油品具有良好的抗磨損和承載性能和保護重倉的齒輪和軸承的損壞和磨損诊胞。WYROL BG油還具有優異的氧化穩定性和防腐蝕特性。
特點和優點
WYROL BG油是專門設計來克服這些問題的產生時锹杈，傳統的軸承潤滑油污染的輥?zhàn)佑秃统善啡旧Y(jié)果撵孤。他們還提供優異的潤滑特性，以減少磨損竭望，提高設備的使用壽命邪码。其優良的化學穩定性，允許延長服務時間咬清，降低維護成本闭专。WYROL BG油具有以下優點：
- 可接受的材料非常低的染色性能提高生產
- 較低的scrapage費率
- 改進的軋輥冷卻液的使用壽命和更低的維護成本
- 良好的抗磨損和承載特性增加軸承和齒輪壽命
- 高氧化穩定性提高油品使用壽命
應用
與傳統的礦物油和轉換這些液體WYROL BG油是不相容的，需要徹底沖洗和清潔旧烧，之前影钉，添加BG WYROL油。請咨詢您當?shù)氐臓I銷技術代表建議有關轉換程序掘剪。
- 在鋁軋機應用的軸承和齒輪潤滑
- 他們是適合的飛濺和油霧潤滑系統
典型屬性
| Wyrol BG |
220 |
320 |
460 |
| 在15oC平委，ASTM D 4052 kg/m3的密度 |
1007 |
1007 |
1007 |
| 運動粘度在40oC，平方毫米/秒夺谁，ISO 3104 |
235 |
320 |
480 |
| 運動粘度在100°C廉赔，平方毫米/秒，ISO 3104 |
32 |
45 |
63 |
| 傾點固荷，oC祥怖，ISO 3016 |
-30 |
-30 |
-27 |
| ISO 2592oC，閃點应婴，COC抽胁， |
275 |
275 |
275 |
| 銅片腐蝕，3H悠衔，100oC权疾，評級，ISO 2160 |
1 |
1 |
1 |
| 防銹锡褂，蒸餾水满律，ISO 7120 |
通過 |
通過 |
通過 |
健康與安全
根據現有資料顯示，該產品預計不會對健康產生不利影響估褐，使用時的用途和材料安全數據表（MSDS）中提供的建議遵循咖迄。MSDS可根據要求通過你的銷售合同辦公室，或通過互聯網酝侯。此產品不應該被用于其擬定用途以外的其他用途溉浙。如果處理用過的產品烫止，照顧，以保護環境戳稽。
美孚字型馆蠕，飛馬設計和美孚Wyrol BG是埃克森美孚公司或其子公司之一惊奇，其附屬公司的注冊商標互躬。
版權所有?2001-2013叭湮克森美孚公司琐店。保留所有權利。
|
Bearing and Gear Oil
Product Description
WYROL BG Series are high performance synthetic low staining bearing and gear oils designed for use in rolling mills. Due to their low staining tendency, they are particularly suitable for use in non-ferrous rolling mill applications. They are formulated with low staining synthetic ingredients that ensure adequate lubrication is provided for heavy-duty bearing and gear unit conditions. Their low staining characteristics ensure that the quality of rolled metal is not impaired through leakage into roll coolant systems. This will ensure an optimum life and quality is obtained from the roll coolant; this reduces maintenance and overall costs. WYROL BG oils have good anti-wear and load-carrying performance and protect heavily loaded gears and bearings from damage and wear. WYROL BG oils also exhibit excellent oxidation stability and corrosion prevention properties.
Features and Benefits
WYROL BG oils are specifically designed to overcome the problems generated when conventional bearing lubricating oils contaminate the roll oils and result in finished product staining. They also provide excellent lubrication characteristics to reduce wear and improve equipment service life. Their excellent chemical stability allows extended service intervals and reduced maintenance costs.
WYROL BG oils offer the following benefits:
- Very low staining properties improve the production of acceptable materials
- Lower scrapage rates
- Improved roll coolant life and lower maintenance costs
- Good anti-wear and load-carrying characteristics increase bearing and gear life
- High oxidation stability increases oil service life
Applications
WYROL BG oils are incompatible with conventional mineral oils and changeover to these fluids require thorough flushing and cleaning before adding WYROL BG oils. Consult your local Marketing Technical Representative for advise concerning changeover procedures.
- Bearing and gear lubrication in aluminium rolling mill applications
- They are suitable for splash and mist lubrication systems
Typical Properties
| Wyrol BG |
220 |
320 |
460 |
| Density at 15oC, kg/m3, ASTM D 4052 |
1007 |
1007 |
1007 |
| Kinematic Viscosity at 40oC, mm2/s, ISO 3104 |
235 |
320 |
480 |
| Kinematic Viscosity at 100oC, mm2/s, ISO 3104 |
32 |
45 |
63 |
| Pour Point, oC, ISO 3016 |
-30 |
-30 |
-27 |
| Flash Point, COC, oC, ISO 2592 |
275 |
275 |
275 |
| Copper Corrosion, 3h, 100oC, rating, ISO 2160 |
1 |
1 |
1 |
| Rust Prevention, distilled water, ISO 7120 |
Pass |
Pass |
Pass |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Mobil Wyrol BG are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright ? 2001-2013 Exxon Mobil Corporation. All rights reserved.
