深圳市旺鴻達潤滑油貿易有限公司
電話：0755-29675629
傳真：0755-81472607
手機：13662610386
聯系人：歐陽民
網址：www.snhqys.com
郵箱：shell2123@126.com
地址：深圳市寶安區(qū)龍華街道龍觀東路金龍華廣場二期金龍閣1307室
郵編：518000
|
|
|
| 產品展示 |
|
RENOLIN UNISYN CKC 150詳細說明】畎尽（瀏覽1886次）
RENOLIN UNISYN CKC
Polyalphaolefin-Based Industrial Gear and Lubricating Oils Designed for use in industrial gearboxes and general lubricating systems subject to high temperatures, RENOLIN UNISYN CKC oils are fully-synthetic lubricants based on polyalphaolefins. RENOLIN UNISYN CKC oils lower friction and reduce wear. Furthermore, these oils increase the efficiency of machine components. Depending on the application, a number of viscosity grades can be satisfied by a single RENOLIN UNISYN CKC oil. This allows users to rationalize stocks and cut costs. Polyalphaolefins, and thus RENOLIN UNISYN CKC oils, are miscible and compatible with mineral oils at all ratios and can be disposed-of as such. The compatibility of polyalphaolefins with common machinery materials, seals and paint finishes is comparable with that of mineral oils. Changing-over to RENOLIN UNISYN CKC is therefore very simple and requires no prior flushing. RENOLIN UNISYN CKC oils can be classified as CKC lubricating oils according to ISO 6743-6.
The specific benefits of using RENOLIN UNISYN CKC oils are:
- Extremely good ageing resistance
- Excellent corrosion protection
- Good cold-flowing properties
- Excellent viscosity-temperature behaviour
Application:
RENOLIN UNISYN CKC oils can be used in bearings, lubrication systems and gearboxes subject to high or fluctuating temperatures.
In gearboxes and lubricating systems where the sump temperatures exceed 90°C, normal mineral oil change intervals can be significantly extended with RENOLIN UNISYN CKC oils which, in turn, substantially lower operating and disposal costs.
When changing-over to RENOLIN UNISYN CKC oils in machines and equipment which operate at temperatures of over 60°C, one viscosity grade lower than the normal mineral oil grade should be selected.
| RENOLIN UNISYN CKC |
|
68 |
100 |
150 |
220 |
320 |
460 |
680 |
|
| Lubricating oil type |
|
|
|
|
|
|
|
|
|
| acc. to ISO 6743-6 |
|
CKC 68 |
CKC 100 |
CKC 150 |
CKC 220 |
CKC 320 |
CKC 460 |
CKC 680 |
|
| acc. to DIN 51 502 |
|
HC 68 |
HC 100 |
HC 150 |
HC 220 |
HC 320 |
HC 460 |
HC 680 |
|
| Characteristics |
Unit |
|
|
|
|
|
|
|
Test method |
| Kinematic viscosity |
|
|
|
|
|
|
|
|
|
| at 40 °C |
mm2/s |
72 |
104 |
151 |
221 |
315 |
479 |
668 |
ASTM D 445 |
| at 100 °C |
mm2/s |
11.1 |
14.9 |
19.4 |
25.8 |
33.3 |
45 |
62 |
ASTM D 445 |
| Viscosity index |
|
146 |
149 |
147 |
148 |
148 |
149 |
159 |
ASTM D 2270 |
| Density at 15 °C |
kg/l |
0.837 |
0.842 |
0.848 |
0.85 |
0.851 |
0.853 |
0.855 |
ASTM D 1298 |
| Flash point, Cleveland open cup |
°C |
248 |
254 |
230 |
232 |
234 |
304 |
262 |
ASTM D 92 |
| Pour point |
°C |
-51 |
– 45 |
– 45 |
– 42 |
– 39 |
– 33 |
– 33 |
ASTM D 97 |
| Neutralization number |
mg KOH/g |
0.8 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
ASTM D 974 |
| Foaming, |
|
|
|
|
|
|
|
|
|
| seq. I |
ml |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
ASTM D 892 seq. I III |
| seq. II |
ml |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
15/0 |
ASTM D 892 seq. I III |
| seq. III |
ml |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
5/0 |
ASTM D 892 seq. I III |
| Copper corrosion |
degree of corr. |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
ASTM D 130 |
| Rust prevention |
|
pass B |
pass B |
pass B |
pass B |
pass B |
pass B |
pass B |
ASTM D 665 |
| Four ball EP test |
N |
2200 |
2400 |
2400 |
2400 |
2400 |
2400 |
2400 |
ASTM D 2783 |
| FZG mechanical gear rig test |
load stage |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
> 12 |
DIN 51 354-2 | |
|
|
Copyright (C) 2010 深圳市旺鴻達潤滑油貿易有限公司 www.snhqys.com All Right Reserved
地址：深圳市寶安區(qū)龍華街道龍觀東路金龍華廣場二期金龍閣1307室 電話：0755-29675629 傳真：0755-81472607 聯系人：歐陽民
網址：www.snhqys.com E-mail：shell2123@126.com 友情鏈接：旺鴻達潤滑油 粵ICP備16127079號 |
|
